KRIBIOLISA™ High Five (Hi5) HCP ELISA

SKU: KBBP21 Category:

Enzyme Immunoassay for the Quantitative Determination of Hi5 Host Cell Proteins in cell culture supernatant and biological solutions. This ELISA kit is intended in determining the presence of High Five cells Host Cell Protein contamination in various products that are manufactured through recombinant expression in Hi5 cells. It has been validated successfully for testing of in process and final product HCPs in a variety of products regardless of growth and purification process.


Availability: 3 – 4 Weeks | Pack Size: 1 x 96 wells


Description

Introduction:
High Five cells (sometimes referred to as High-Five or Hi5) represent a safe, effective and inexpensive platform for protein production. Their remarkable ability to produce very large amounts of recombinant proteins such as diagnostic reagents and recombinant vaccines remains unmatched. The High Five cells were originally isolated from insects in BTI’s Granados lab in the late 1980s. BTI is the sole proprietor of High Five cells and related sub-clones. (BTI; Boyce Thomson Institute, NY, USA). The KRIBIOLISA Hi5 (High Five) HCP ELISA kit is designed to quantitatively measure HCPs contamination in pharmaceutical products manufactured using the High Five Cells expression systems.

The advantages of using insect cells for the expression of complex proteins, such as glycoproteins, G-protein-coupled receptors (GPCRs), virus-like particles (VLPs), and “difficult-to-express” mammalian proteins, have been extensively demonstrated (Stolt-Bergner et al., 2018). High Five cells have been used successfully in the production of several viral-like particles (VLPs), which is of critical importance in vaccine development, such as the development of the COVID-19 vaccine (Krammer and Palese 2015; Cox, 2012). High Five cells have been shown to secrete large quantities of VLPs, making them suitable for purification and use in vaccine manufacturing (Fern?ndez and Vega, 2013). This characteristic, along with other advantages of High Five cells, such as their ability to produce multi-subunit proteins, highlights their potential for high-quality product output in biopharmaceutical manufacturing. When considering the production of recombinant proteins to meet pharmaceutical requirements or for structural, functional, and drug screening studies, the preferred choice is the Baculovirus Expression Vector System (BEVS) (Assenberg et al., 2013; Fern?ndez and Vega, 2013). The BEVS offers flexibility, rapidity, and the ability to generate high titers of complex and multi-subunit gene products, even from challenging cellular locations such as cell membranes (Drugmand et al., 2012).

One significant advantage of High Five cells is their high expression levels, making them ideal for large-scale protein production (Assenberg et al., 2013; Drugmand et al., 2012). High Five cells are also well-suited to fold and post-translationally modify complex proteins, such as glycosylation. They can perform these modifications with high efficiency in a similar way to mammalian cell systems, and have been reported to produce 2-10x high levels of recombinant proteins compared to Sf9/Sf21 insect cells. Additionally, High Five cells have excellent culturing qualities, which reduces the need for complex bioreactor setups and equipment.

Principle:
The method employs sandwich ELISA technique. Monoclonal antibodies are pre-coated onto microwells. Samples and standards are pipetted into microwells and H5 HCP present in the sample are bound by the antibodies. HRP conjugated antibodies are added and incubated to form a complex. After washing microwells in order to remove any non-specific binding, the substrate solution (TMB) is added to microwells and color develops proportionally to the amount of H5 HCP in the sample. Color development is then stopped by addition of stop solution. Absorbance is measured at 450 nm.

Sources:
Stolt-Bergner, P.C., Overkleeft, H.S., van Kasteren, S.I. (2018). Chemical protein modification in drug discovery. Nat. Rev. Drug Discov., 17, 471?493.
Cox, M.M. (2012). Recombinant protein vaccines produced in insect cells. Vaccine, 30, 1759?1766.
Krammer, F., Palese, P. (2015). Advances in the development of influenza virus vaccines. Nat. Rev. Drug Discov., 14, 167?182.
Assenberg, R., Wan, P.T., Geisse, S., Mayr, L.M. (2013). Advances in recombinant protein expression for use in pharmaceutical research. Curr. Opin. Struct. Biol., 23, 393?402.
Fern?ndez, J.M., Vega, M.C. (2013). Baculovirus Expression System in Medicago truncatula Cell Cultures for the Production of Recombinant Proteins. Mol. Biotechnol., 54, 371?379.
Drugmand, J.-C., Schneider, Y.-J., Agathos, S.N. (2012). Insect cells as factories for biomanufacturing. Biotechnol. Adv., 30, 1140?1157.









If you have published a paper by using any of our ELISA since 01/01/2023, kindly fill out the “Krishgen Publication Reward Application Form” with complete information and send it by at email: info@krishgen.com, with the subject “Krishgen Publication Reward”. We will get back to you with the Amazon / Krishgen Credit Reward after we confirm it ASAP!

View more details about our Publication Reward

Additional information

Sample Type

Cell Culture Supernatant and Biological Solutions

Calibration Range

3 – 100 ng/ml

Sensitivity

Limit of Quantification: 0.188 ng/ml
Limit of quantification (LOQ): 3 ng/ml

Regulatory Status

Research Use Only available

Detection Method

Colorimetric

Storage Temperature

Samples to be used within 5 days can be stored at 2-8 Degree Celcius, besides that, samples must be stored at – 20 Degree Celcius (assay less lan or equal to 1 month) or -80 Degree Celcius(assay less lan or equal to 2 months) to avoid loss of bioactivity and contamination. Avoid multiple freeze-thaw cycles. The hemolytic samples are not suitable for this assay.

Protocol

Assay Procedure:
It is strongly recommended that all Standards and Samples be run in duplicates or triplicates. A standard curve is required for each assay.
1. Add 100 ul Standards and Samples to respective wells.
2. Cover the plate with a sealer and incubate for 90 minutes at room temperature on a shaker at 200-600rpm.
3. Aspirate and wash plate 4 times with diluted Wash Buffer (1X) and blot residual buffer by firmly tapping plate upside down on absorbent paper. Wipe of any liquid from the bottom outside of the microtiter wells as any residue can interfere in the reading step.
4. Pipette 100 ul Anti-H5 HCP:HRP Conjugate to all wells. Mix well.
5. Cover the plate with a sealer and incubate for 30 minutes at room temperature on a shaker at 200-600rpm.
6. Aspirate and wash as per Step (4) above.
7. Pipette 100 ul TMB Substrate in all the wells.
8. Incubate the plate at room temperature for 15 minutes. DO NOT SHAKE or else it may result in higher backgrounds and worse precision. Positive wells should turn bluish in color.
9. Pipette 100 ul of Stop Solution to all wells. The wells should turn from blue to yellow in color.
10. Read the absorbance at 450 nm with a microplate within 10-15 minutes after addition of Stop solution.